Firmus Barrier

• Length: 2.0m.
• Height: 1.0m.
• Depth: 42mm.
• Standard base depth: 660mm.
• Anti-trip base depth: 480mm.
• Weight: 12kg.
• Made From: HDPE (high-density polyethene) 100% recycled material.
• Colour: Orange base with hi-visibility. Black stands.
• Regulations: Conforms to traffic sign regulations and general directions.
• Made to: BSEB8442 and BSEN12899-1.

Below are some of the main features of this item:

• Lightweight (single-person lift).
• Blow moulded.
• Simple to assemble.
• Chapter 8 reflectivity.
• Rotates to 360-degree angles with their swivel bottoms.
• Built-in hook and eye connection system.
• Anti-tripping stands are available.
• It can be used indoors and outdoors.
• Used on very uneven ground.
• Environmentally friendly.
• Can withstand winds of 19.4mph as tested with MIRA.
• Long life expectancy.

These are the particular specifications of the firmus barrier that comply with government documentation. The reflective strip needs to be 1250mm long and a min of 139mm in thickness.

They are straightforward to connect, and a single person can complete this.

Attach the feet first by placing the base of the feet on the ground. Then push the firmus barrier down on top of the feet so the pegs fit securely.

Lift the barrier to attach the male end of one to the female connection of the other. Repeat this process until your perimeter is complete. Make sure that the reflective strip is facing traffic or pedestrians.

You have standard feet that protrude out, whereas the anti-trip feet have been designed to prevent falls around the working area by being flat on the ground.

All firmus barriers are given a wind speed test to see how much wind force they will take before falling. This particular firmus barrier has been tested to withstand a minimum of 19.4mph wind speeds.

This should take a single person a maximum of 1 minute to complete. One hundred linear metres would take approximately half an hour to an hour (depending on the layout and the ground).